Sunell Security SN-TPC4201VT, User Manual, Page: 38 / 59

Thermal Setting
Thermal Imaging Box Network Camera
User Manual
30 Issue V1.0 (2020-10-28
）
When you select time by dragging the cursor, the cursor cannot be moved out of the
time area. Otherwise, no time can be selected.
Method 3
：
Click in the alarm time page to select the whole day or whole week.
Deleting alarm time: Click again or inverse selection to delete the selected alarm
time.
Step 4
Click Apply .
The message "Apply success" is displayed, the system saves the settings.
Step 5
There are four types schedule linkage to set, like threshold alarm, threshold warning,
temperature difference alarm and temperature difference warming.
----End
3.6 Bad Point Check
Operation Procedure
Step 1
Choose Configuration > Thermal > Bad Point Check.
The Bad Point Check page is displayed, as shown in Figure 3-9.
If the image has a white dot as shown in figure, user can test the function to recover the
bad point. User should connect the technical support at this condition to make sure to
apply.