Sunell Security SN-TPC4201VT, User Manual, Page: 34 / 59

Thermal Setting
Thermal Imaging Box Network Camera
User Manual
26 Issue V1.0 (2020-10-28
）
Figure 3-4 Temperature Area Setting Interface
Step 3. Click Apply , the message “Apply success” is displayed, the temperature area is
set successfully.
NOTE
ID 0 is the full screen, the area cannot be changed.
: the lowest temperature of the full screen.
:the highest temperature of the full screen.
: the lowest temperature of the area.
: the highest temperature of the area.
Delete a temperature ar ea:
Step 1. Select an area ID.
Step 2. Click the temperature area and right-click.
Step 3. Remove the tick of area ID.
Step 4. Click Apply
, the message “Apply success” is displayed, the temperature area is
deleted successfully.
Step 4
Click Apply .
The message "Apply success" is displayed, the system saves the settings.