3
1.
Ensure the device has no damage due to transportation.
2.
Install the unit into the rack and secure it with screws. Connect
the power cable plug to a power outlet.
3.
Connect cable to input port «IN» . If the input signal is present,
the appropriate port indicator lights. If there is no signal, the indica-
tor flashes.
4.
Connect the desired number of output lines to the connectors
«OUT».
5.
For wireless transmission connect antenna and disconnect
DMX input cable. If connection with transmitter is missing, LED indi-
cator Status is lit. If connection with transmitter is present, LED indica-
tor Link is lit.
6.
The device is ready for use.
Installation
Before mounting and power up, it is necessary to verify protec-
tive earthing and cable connections.
Technical maintenance
Maintenance the device, search and troubleshooting should be
performed by service personnel. The device should be free from
dirt, dents, connecting cables and wires must be intact and securely
fastened.
