Wireless Splitter PRO is a series of multifunctional rack mount-
able splitters boosting the signal to create 5 or 10 additional DMX
lines from DMX512 or BeDMX inputs. BeDMX is hi-end technology
for transmission between devices in 2.4 GHz ISM band with bidi-
rectional communication and Adaptive Frequency Hopping (AFH)
which guarantees near 100% resistance to radio frequency interfer-
ence by a hop rate of 1600 hops per second. All ports have full
galvanic isolation. The device is suitable for indoor use and rack
mountable. Splitters are powered by 90-250 V industrial AC mains,
power consumption is less than 5 watts.
If you connect both DMX and BeDMX, DMX has priority, and
BeDMX may be used as backup channel. For connection via BeD-
MX only, input DMX line should be disconnected.
2
Key features:
• No buttons;
• XLR or EtherCON, RJ-45 (customer request);
• Wireless back up function;
• Resistance to interference.
Safe operation
WARNING!
The device uses hazardous voltage AC 230 V
In installation, operation, preventive maintenance and repairs of
the device, the requirements of the safety rules must be followed.
To ensure safe and reliable operation of the devices, please ob-
serve the following requirements:
• Use the device only for its intended purpose;
• Do not use devices that shows signs of malfunctioning;
• Avoid strong physical impacts on the device;
• Protect devices and cables from contact with corrosive liquids.
Whenever a fault is detected in the device, please contact the
manufacturer.
General information
