Page 29
will want to reset the time for your own time zone. (The system will auto-
matically adjust to and from daylight savings time.)
To accomplish this, press
DISPLAY, MODE
and
DISPLAY
within five sec-
onds each. A number representing the hour will be displayed, followed by
AM
or
PM
. The hour will advance or decrease each time
UP
or
DOWN
is
pressed within five seconds. Then, press
DISPLAY
again to display the min-
utes. Adjust the minutes as necessary by pressing
UP
or
DOWN .
After 5
seconds, the display will return to normal.
10.2 Changing Skimming/Heating Cycles
The Sentry Control System allows you to easily adjust two separate aspects
of each of the skimming/heating cycles (1) the time of day at which each
cycle begins, (2) the duration of each cycle.
To make adjustments, first press
CYCLE
to enter the skimming/heating cycle
programming mode. The LCD screen will display the following in the upper
right corner:
ADJUST
START TIME
FILTER
CYCLE
This means the system is ready to accept your changes to the start time for
skimming/heating cycle number one. Simultaneously, the large four-digit
display in the center of the screen displays the currently programmed start
time for that cycle. At this point, you have four options. You may:
(1) Press
UP
or
DOWN
to adjust the start time in increments of 30 min-
utes.
(2) Press
CYCLE
to display and adjust each subsequent skimming/heating
cycle start time. With each press, the currently programmed status will be
shown in the large four digit display. To adjust any displayed value, simply
press
UP
or
DOWN .
(3) Press
SELECT
to move down the menu from Start Time to Duration,
with each press, the currently programmed duration will be shown in the
large four-digit display. Press
UP
or
DOWN
to adjust the duration in incre-
ments of 15 minutes.
(4) Press
DISPLAY
to make the skimming/heating cycle programming
characters disappear from the screen and the main display return to show-
ing the water temperature. If no sensor is pressed within 30 seconds, the
screen automatically returns to the standard water temperature display.
START TIME