User Guide FMC-DAQ2p5
Page 2 of 19
Rev. 1.0
PROPRIETARY NOTICE:
The information contained herein is proprietary to Sundance DSP Inc., and shall not be reproduced or disclosed in whole or in part, or
used for any other design or manufacture without written authorization from Sundance DSP Inc.
6 R
EFERENCE LIST
A set of links for your easy access to guides for devices used on this module:
AD9136
– 16 bit 2.8GSPS Dual channel DAC;
ADC12J2700
– 12 bit single channel 2.7 GSPS ADC;
HMC7044
– High performance 3.2GHz JESD204B clock jitter cleaner;
PG066-JESD204.pdf
– JESD204B Logic core IP user guide.
ADC12J2700 GUI
– GUI for ADC configuration.
DAC software suite
– GUI for DAC configuration.
HMC704x software
– GUI for HMC7044 clock IC configuration.
7 C
OOLING
User must make sure that adequate air flow and cooling is provided for using this module.
8 SAFETY
The module presents no hazard to the user.
9 EMC
The module is designed to operate within an enclosed host system that provides adequate EMC
shielding.
Operation within the EU EMC guidelines is only guaranteed when the module is installed within an
appropriate host system.
The module is protected from damage by fast voltage transients introduced along output cables from
outside the host system.
Short-circuiting any output to ground does not cause the host PC system to lock up or reboot.
10 O
RDERING
I
NFORMATION
FMC-DAQ2p5 This is the default model with 1 ADC channel and 2 DAC channel
FMC-2p5-ADC
0
-DAC
2
0x ADC and 2x DAC channels,
FMC-2p5-ADC
1
-DAC
0
1x ADC and 0x DAC channels,
