Page 73
980™ Series
Should checking the above steps fail to correct the problem, please call
your authorized dealer so that he may arrange service.
Sundance builds the best hot tubs in the industry. Nonetheless, we are
always striving to improve the quality and features of our products. Your
input as a Sundance hot tub owner is a cherished part of this process. If
you have any comments or suggestions, or if you wish to be informed on
any new products for your hot tub, please write to us.
CONGRATULATIONS
on your good taste and welcome to the happiest
and most relaxed family in the world!
PROBLEM
PROCEDURE
Poor jet
action
1. Make certain the jets pump is turned on.
2. Check position of massage selectors.
3. Open air control for selected jet system.
4. Check for adequate water level.
5. Check for dirty filter (pages 56-58).
Water is too
hot
1. Reduce thermostat setting (page 19).
2. Switch hot tub to “Economy” mode to turn heater on
only during programmed filter cycles (page 47).
No heat
1. Check thermostat setting.
2. Keep the cover in place while heating.
3. If “heater on” indicator is lit but no temperature rise
is experienced after a reasonable period of time,
contact your Sundance Spas dealer or qualified
service technician.
Filter/
circulation
pump off
1. Verify filter/circulation pump is programmed to run 8
hours a day (page 42).
2. Hot tub water is warmer than 95°F (35°C) and two
degrees warmer than the set temperature. The
“Summer Logic” safety feature has activated.
Summary of Contents for Claremont 980 Series
Page 1: ...P N 6530 397D Rev A 980 Series Owner s manual Kingston Claremont...
Page 6: ......
Page 88: ...Page 82 980 Series...
