background image

Page 33

980™ Series

11.0  Operating Instructions

Your Sundance Spas hot tub has a touch-sensitive control panel, 

massage selector valves, and air control knobs located on the top rim 

of the hot tub (Sections 9.1-9.6, pages 23-28). These controls let 

you operate many of the special functions of your Sundance hot tub. By 

familiarizing yourself with the following information, you will be able to 

gain the full benefits afforded by the various functions of your hot tub.

11.1  Activating the Jets Pumps and Blower

From the Home Menu, (Figure 11.1a), tap 

 to enter the Submenu. The 

panel will display the Jets Pump Submenu (Figure 11.1b).

Note:

 Once you enter the Jets Pump Submenu, all the pumps will acti-

vate. You can turn off the jets pump by tapping the jets pump button.

 

 

=  Jets Pump 1 Button

 

=  Jets Pump 2 Button

 

=  Blower Button

 

=  Back Button:

 Tap to go back to the Home Menu.

A. 

Jets Pumps

1.  Tap the Jets 1 button to turn the pump on and off.

2.  Tap the Jets 2 button to turn the pump on and off.

Note:

 Anytime a pump has been manually turned on, it will automati-

cally turn off after approximately 20 minutes. If at this time you desire 

more jet operation you may simply turn the pump(s) back on.

B. 

Air Injection

Tap 

Blower

 to turn the blower on and off. The air blower forces air through 

the injectors and Focus-Relief Jets. The blower automatically turns off 

after 20 minutes.

6:45

JETS

1

2

Blower

6:45

100

Auto

Auto

Figure 11.1a

Figure 11.1b 

1

2

Blower

Summary of Contents for Claremont 980 Series

























































































Reviews: