Page 53
880 SERIES
14.4
Pillow Care
Remove and clean the headrest pillows as needed with soapy water us-
ing a cloth or soft-bristle brush. To maintain water resistance and luster,
apply a quality vinyl conditioner once a month. Always remove the pillows
when adding chemical shock treatment to the spa water. The pillows can
be returned to the spa when the sanitizer reading drops below 4.0 ppm.
14.5
Maintaining the Hot Tub Cabinet
The hot tub cabinet require little or no maintenance of any kind. To clean,
wipe cabinet with a clean towel and mild detergent soap solution.
CAUTiON:
Never spray cabinet with a high pressure garden
hose for any reason since this action may induce an electri-
cal short in the hot tub’s electrical equipment.
14.6
Maintaining The Cover
Using the Sundance insulating hot tub cover anytime the hot tub is not
in use will significantly reduce your operating costs, heat-up time, and
maintenance requirements. To prolong the life of the cover, handle it
with care and clean it regularly using mild soap and water. Periodic
treatments with a special conditioner developed for Sundance hot tub
covers will help protect against deterioration caused by U.V. rays from
the sun. Never allow anyone to stand or sit on the cover, and avoid
dragging it across rough surfaces.
1
2
Place both hands on
pillow with thumbs as
shown.
Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3
4
5
Flex pillow lip inward
2-3" to get a good
grip on the ends.
Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
or attempt to clean them with a non-approved vinyl cleaning agent!
6
To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
snap in place.
