Suncast HomePlace Series, Assembly Manual

Page: 31 / 47

page 30
©
Suncast Corporation
Step 67: Mark siding 8” f rom top of wall on both ends of gable wall
and snap a line as shown.
Step 69: Install first gable siding piece, keeping piece aligned at ends and with chalk lines as shown.
Note: Siding grooves should also align with grooves on wall.
Step 70: Install pre-cut gable
siding brace at siding splice as
shown.
Gable Siding Installation
Step 68: Starting with overlap at
front, layout gable siding pieces
as shown.
Note: There is a left and right
for end gable siding pieces.
Front piece is 4’ wide.
Step 71: Install remaining gable siding pieces repeating previous
steps. Repeat on opposite gable wall.
7”
4’