Suncast HomePlace Series, Assembly Manual

Page: 30 / 47

page 29
Step 62: Layout rafters and align as shown.
Step 63: First assemble two end rafters by fastening one rafter gusset to rafters using (12) 6p nails as
shown. Assemble remaining 7 rafters by fastening a rafter gusset to each side of rafter.
Step 64: Mark off wall every 2 ft.
on center.
Rafter Assembly & Installation
Incorrect, birdsmouth should be
at bottom end of rafter.
Step 65: Install first end rafter
making sure gusset is facing
inside. Keep rafter flush with
edge of gable wall.
See step 67 before continuing.
Step 66: Install remaining rafters
by aligning center of rafter with 2
ft. marks. Toenail rafters into top
wall plate to secure into wall.
©
Suncast Corporation