SPECIAL NOTES, INSTRUCTIONS AND OPTIONS
• These instructions cover Sunburst CMh systems with item codes SBCMH31531K (120V/240V,
3100K lamp); SBCMH31542K (120V/240V, 4200K lamp); SBCMH315231K (277V, 3100K lamp);
and SBCMH315242K (277V, 4200K lamp). The 120V/240V models are intended only for 120V or
240V, 50/60Hz operation and the 277V models are intended only for 277V, 60 Hz operation.
• Avoid direct contact with water and liquids to prevent electric shock or internal damage to the
unit.
• The lamp may require 10-30 minutes cooling time before restarting.
• After you plug in the Sunburst CMh, the lamp may require several minutes to reach its full
brightness.
• In the event of a momentary power interruption, be aware that the lamp will not restart
immediately. This is normal, and protects the lamp and ballast.
• Some variation in the color of light emitted by the lamp is not unusual, especially in the first
100 hours of operation.
• Never pull the cord to unplug the fixture—pull the plug only.
• Avoid scratching the lamp, subjecting it to undue pressure, or getting it wet when it is hot—
these actions may cause the lamp to break.
• In the event of lamp breakage, immediately unplug the reflector to prevent exposure to
ultraviolet energy, which may be harmful to eyes and skin.
• Keep room temperature below 95°F, with adequate air circulation by fan in the growing area.
• Two lamp color temperature options are available: 3100K and 4200K, one of which you will
have chosen when purchasing your system.
RESIDENTIAL VOLTAGES - SINGLE PHASE POWER
COMMERCIAL VOLTAGES - THREE PHASE POWER
6
