INSTALLATION
1. Carefully remove all of the components from the box and the protective cardboard to ensure
that your Hydrofarm Sunburst box includes all of the parts listed in the “PARTS LIST” section.
2. Inspect the included components for any damage, missing parts, or other concerns. Contact
your local retailer in order to get a replacement or new part if required.
3. If there is a protective film on the reflector surfaces, be sure to remove it completely prior to
turning on the system.
4. Remove the lamp from its packaging and install it carefully into the socket. Take care to insert
the semi-circular pin on the lamp into the matching semi-circular hole on the socket. Making
sure the lamp is fully seated in the socket, turn the lamp a quarter turn. This will lock the lamp in
place.
5. It is best to wear gloves when handling the lamp in order to avoid getting skin oils on the lamp’s
envelope.
Lamp Base
Lamp Socket
Lamp Installation
4
