background image

1. Important Information

Take time to read this user manual before using the SB-HDWT Wireless HD Transceiver. 

This manual contains important information and instructions regarding operating your wireless 

HDWT-Tx (transmitter) and HDWT-Rx (receiver). 

1.1 Warranty

Your SB-HDWT is under limited warranty by SunBriteTV, provided the product is handled 

properly for intended use, in accordance with its operating instruction. Examples of actions 

that may void this warranty include but are not limited to:

 

Repairs, modification or alterations perfomed by unauthorized service personnel   

 

Damages caused by accidents including but not limited to lighting, water, fire, or moisture

 

Use of third-party power adapters, or use of supplied power adapters with power sources 

not compliant with the specifications on the labels of the power adaptors

 

Altering, deleting, removing or making illegible the serial numbers on the units.

1.2 Safety Precautions

WARNING!

RISK OF ELECTRICAL 

SHOCK DO NOT OPEN

WARNING: 

TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER NO USER-

SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED PERSONNEL

 

Unplug the power supply for the transmitter and the power cord for the receiver before 

you connect or disconnect A/V components to the SB-HDWT system.

 

To prevent electric shock, be sure the electrical plugs used on the transmitter's power 

supply and the receiver's power cord fit the AC electrical outlets they are plugged into. 

These units are designed for 120-volt, 60-cycle AC power.

 

Be sure the power cord for the receiver and the cord running from the power supply to the 

transmitter are routed so they will not be accidentally damaged.

 

Do not overload AC outlets or extension cords by connecting more electrical load than 

they were designed to handle. This could result in electric shock or fire.

 

If the SB-HDWT system will not be used for a month or longer, unplug the receiver's 

power cord and the transmitter's power supply. This will prevent damage from lightning 

strikes.

Summary of Contents for SB-HDWT














Reviews: