background image

6. FCC ID Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation.
The user manual or instruction manual for an intentional or unintentional radiator shall 

caution the user that changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to operate the equipment. 

In cases where the manual is provided only in a form other than paper, such as on 

a computer disk or over the Internet, the information required by this section may be 

included in the manual in that alternative form, provided the user can reasonably be 

expected to have the capability to access information in that form.
For a Class B digital device or peripheral, the user instructions shall include the 

following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 
• Reorient or relocate the HDWT-Rx. Increase the separation between the    

equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which the    

receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help.

7. IC ID Warning

DISCLAIMER

Operation is subject to the following two conditions: (1) this device may not cause 

interference, and (2) this device must accept any interference, including interference 

that may cause undesired effects.

8.Other Information

We suggest you read this user manual carefully before using our product. If any 

problems occur while using our product that cannot be resolved after consulting this 

manual, please contact us:

E-mail: [email protected]                

Tel: 866 357-8688

13 

Summary of Contents for SB-HDWT














Reviews: