Page 30
Adjusting On-Screen Displays – Setup Menu (continued)
Ambient Light Sensor
Note the Ambient sensor function is only available when the
Personal Picture mode is selected.
Press the
TS
buttons to highlight the Ambient Light Sensor
adjustment, then use
W
X
to turn the ambient light sensor
on and off. The ambient light sensor automatically measures
ambient light level and adjusts the backlight to the level
preset using the Auto Backlight Floor adjustment explained
below. When TV is selected as a source, you will have to go
all the way to the bottom of the Setup menu and press
T
to
reach this adjustment.
Ambient Sensor Value
This meter shows the level of ambient light as measured at the
light sensor on front of the TV (near the SunBright TV logo).
This shows the level of the ambient light. The value in the
meter remains fixed until another menu item is highlighted. To
refresh the meter, press the
TS
buttons. Unless TV is selected
as the source, you will have to go all the way to the bottom
of the Setup menu and press
T
to reach this adjustment. This
adjustment is available only when the ambient light sensor is
activated.
