SunBriteTV Model 8418UHD Operator’s Manual
Page 29
Adjusting On-Screen Displays – Setup Menu (continued)
Software Update (USB)
This function is used to update the software on your TV.
Consult your dealer or SunBrite TV for more information.
EDID Switch
Press the
TS
buttons to highlight the EDID Switch, then
use
W
X
to select EDID 1.4 or EDID 2.0 mode.
EDID 1.4 should be used for older devices or with 4k
extenders or cables which are limited to 4k @ 30hz.
EDID 2.0 should be used for newer source devices for full 4k
@ 60hz resolution
Analog Audio Out
The 3.5mm analog audio output on the rear panel can be us
to feed a soundbar or other external audio system. Press the
TS
buttons to highlight the analog audio out adjustment,
then use
W
X
to switch the earphone output on and off.
Speaker
This control turns the TV’s speakers on and off. Press the
TS
buttons to highlight the Speaker adjustment, then use
W
X
to switch the speakers on and off.
No speakers included. This setting must be turned on for TV
audio to be audible through an external audio system.
