Page 18
TV Installation - Connecting the Power Cord
Power
Turn on the TV by pressing the button once. Press the button again to
turn off the TV.
Input
This button switches between the different sources of the TV. When the
On-Screen Display (OSD) is active, this button acts as the enter button
and confirms the menu selection.
Menu
This button activates the OSD. If a sub-menu is active, pressing this
button will return selection to the previous menu level.
CH+/CH-
These buttons change the TV channel up or down. If the OSD is active,
these buttons function as up or down controls for the menu.
Vol+ /Vol-
These buttons increase or decrease the volume. If a sub-menu is active,
pressing these buttons will move the selection left or right. If the OSD is
active, Vol+/Vol- is used to select the highlighted options.
IR Sensor
Connect the power cord to a GFCI-protected AC outlet
with “in-use” waterproof cover.
Warning: TV must be installed at least 5 feet away from
standing water, such as (but not limited to) a pool or
spa.
Connecting the Power Cord
WARNING:
TV AND GFCI RECEPTACLE MUST BE INSTALLED AT LEAST 5 FEET AWAY FROM STANDING WATER , SUCH AS (BUT NOT LIMITED
TO) A POOL OR SPA.
Connect the power cord after you have made connections to your video equipment.
Side Panel Controls
Front Panel
