background image

SunBriteTV Model 3260HD Operator’s Manual

Page 31

  

General Cleaning

Remove any dirt and salt deposits from the cabinet, being careful to rinse the cloth frequently to avoid scratching the TV or screen 

surface. Avoid using harsh chemicals, abrasives, or solvents when cleaning any surface on the unit.

Snow and Ice

Use a soft brush and towel to remove snow and ice from the unit. 

Fiber Filter- 

 Over time, the fiber filter collects dirt and must be cleaned or replaced.  

There are four Fiber Filters located on the back of the unit, that cover the vent openings. There are two Fiber Filters on the top of the unit, 

and two on the bottom of the TV (Figure 1). 

CAUTION! NEVER SPRAY OR DIRECT A HOSE INTO THE VENT OPENINg OF THE TV. 

1.  Release the Fiber Filters by pulling them out from the corner of the Intake Vent (Figure 2). 
2.  Clean by removing the filter and washing with warm soapy water.  Allow to completely air dry overnight prior to reinstalling.  (Do 

not compress or squeeze filter as it will break down it’s cellular structure.)
3.  Put the Fiber Filters back up into the Intake Vent. Make sure the filters fit snuggly and fill the entire space of the Intake Vent (Figure 4). 
To Order Replacement Filters, contact your Authorized SunBriteTV Dealer or SunBriteTV’s Customer Service at 800.331.4626.

Fiber Filter

Figure 2

Figure 4

Figure 3

Care of SunBriteTV

Figure 1

Intake Vent

Fiber Filter

Caring for the LCD Panel:

1.  Cleaning the lCD Panel:

With your TV turned off, gently wipe the surface of the display panel with a damp (with water) microfiber, cotton or flannel 

cloth. (Do not use tissues, rags, sponges or paper towels because they may damage the screen and leave lint pieces behind). 
If the LCD panel is very dirty, you can mix equal parts of isopropyl alcohol and distilled water in a clean spray bottle, spray the 

mixture onto the cloth (do not spray the solution directly on the panel) and gently clean the panel. 
A “special outdoor formula” LCD Cleaning Kit is now available and can be ordered from SunBriteTV.

2. When the TV is not in use, keep it covered with the SunBriteTV Outdoor Dust Cover:

The fitted dust cover is designed to protect the LCD panel from the harmful UV rays from direct sunlight, and keeps wind-

blown objects from scratching the surface of the panel.
To order a replacement Dust Cover or Cleaning Kit, contact your Authorized SunBriteTV dealer, SunBriteTV’s Customer 

Care Center at 800.331.4626,  or visit www.sunbritetv.com.

Summary of Contents for 3260HD





































Reviews: