background image

Tip # 27 - Iron shirts like a pro

Start with the collar, working from the 
outer edges into the middle. Iron the 
shoulder next, followed by the cuffs and 
sleeves. Place the collar at the narrow end 
of the board so that one front panel of the 
shirt is extended flat. Iron the front panel 
from shoulder to shirt tail. Rotate to iron 
the back of the shirt. Rotate and complete 
the remaining front panel.

Tip # 34 - Tips for T-shirts

Straighten seams on t-shirts before 
hanging out to dry. To avoid damage to 
printed graphics and logos turn the t-shirt 
inside out and iron the reverse side of 
the print. Never iron areas of your t-shirt 
where perspiration marks are visible as the 
heat of the iron will permanently fix the 
stain.

Tip # 54 - Hung out to dry 

When washing is complete, remove shirts 
from the machine immediately, shake 
them out and hang them on coat hangers 
to air dry – this will keep wrinkles to a 
minimum.

Tip # 18 - Selecting the right temperature

If you are unsure of the correct setting 
for a particular garment, test a small area 
such as a seam or inside hem before 
ironing a visible area. Start with a low 
temperature and slowly increase the heat 
to find the best setting.

Tip # 33 - Don’t be afraid to iron silk

Don’t be afraid to iron silk. Although 
delicate in appearance, silk is the 
strongest and most resilient of all natural 
fibres. To achieve the best results, set to 
a low cotton setting and use regular shots 
of steam. Always use a pressing cloth to 
avoid shine marks.

Tip # 13 - Ironing the seam

Always press seams in the same direction 
they were made. When a garment is 
produced, the fibres will naturally settle  
in the direction they were initially pressed, 
so it’s best not to iron against the grain.

Tip # 26 - Sort types of fabric

Sort articles to be ironed according to the 
type of fabric. This will reduce the need  
to adjust the temperature constantly.  
Start with articles requiring lower 
temperatures and work your way through 
to items requiring higher settings.

Tip # 2 - Summer frocks and frills

Steam is the key when ironing delicate 
summer fabrics such as muslin, cotton 
and linen. Don’t press down with the iron, 
simply hover above the garment and steam 
it using a vertical shot of steam. Ruffling, 
netting, tulle or intricate hand detailing is 
also best ironed using this method.

Tip # 5 - Pressing your winter woollies

Steam is crucial when pressing your 
winter woollies. Woollen garments can be 
hung and steamed using the vertical shot 
of steam feature. After steaming, brush 
the garment with your hand to plump up 
woollen fibres. If ironing the garment flat 
it is best to use a pressing cloth. Don’t be 
afraid to apply pressure – steam and hold.

Tip # 42 - Table settings to impress

To avoid unwanted creases always iron 
your table cloth after taking it out of the 
cupboard. A dinner party is a special 
occasion, so treat the table cloth as you 
would your own outfit. For best results, lay 
towels across your table and iron the table 
cloth over the towels. This will save you 
time and ensure a beautifully presented 
table setting.

Ironing Tips and Tricks

9

Summary of Contents for VERVE Resilium SR6805













Reviews: