7
5.Press and hold the steam button to iron
with steam. When ironing for long periods,
the steam button can be locked-down,
eliminating the need to hold the button
during ironing. Press and slide the steam
button back towards the handle until it
locks into place.
Note:
The iron will continue to emit steam
until the steam button is released.
When you have finished ironing, push
the steam button forward and up until it
releases from the lock-down position.
To dry iron, do not press the steam
button. Both the steam ready indicator
and the thermostat light will cycle on and
off during ironing as the ironing system
maintains the selected steam pressure and
temperature levels.
Note:
To prevent water dripping from the
soleplate, only use the steam function on
higher temperature settings (
••
and above).
6. Once you have finished ironing, switch the
iron and boiler off by moving both switches
to the off position. Switch the power off
at the power outlet and remove the plug.
Wait for the iron to cool completely before
storing. Do NOT empty the water tank.
Refilling the tank during ironing
When the water in the tank falls below the
minimum level, the red low water indicator
will illuminate, and the iron will stop
generating steam.
1. Before refilling the tank, switch the boiler
and iron switches to the off position.
Switch the power off at the power outlet
and remove the plug.
2. Lift the water cover and fill the tank.
Replace the cover.
3. Insert the plug into the power outlet and
turn the power on.
4. Place the boiler and iron power switches in
the on position, and allow the appliance to
heat.
5. Recommence ironing when the thermostat
light goes out and the green steam ready
indicator is illuminated.
Using your Professional Ironing System (continued)
