background image

3

Sunbeam’s Safety Precautions

  Sunbeam is very safety conscious when  

designing and manufacturing consumer 

products, but it is essential that the product user 

also exercise care when using an electrical 

appliance. Listed below are precautions which 

are essential for the safe use of an electrical 

appliance:

•  Read carefully and save all the instructions 

provided with an appliance.

•  Always turn the power off at the power outlet 

before you insert or remove a plug. Remove by 

grasping the plug - do not pull on the cord.

•  Turn the power off and remove the plug  

when the appliance is not in use and  

before cleaning.

•  Do not use your appliance with an extension 

cord unless this cord has been checked and 

tested by a qualified technician or service 

person.

•  Always use your appliance from a power  

outlet of the voltage (A.C. only) marked  

on the appliance.

•  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance by a person 

responsible for their safety. 

•  Children should be supervised to ensure that 

they do not play with the appliance.

•  The temperature of accessible surfaces may 

be high when the appliance is operating.

•  Never leave an appliance unattended while in 

use.

•  Do not use an appliance for any purpose  

other than its intended use.

•  Do not place an appliance on or near a hot 

gas flame, electric element or on a heated 

oven. 

•  Do not place on top of any other appliance.
•  Do not let the power cord of an appliance 

hang over the edge of a table or bench top  

or touch any hot surface.

•  Do not operate any electrical appliance with 

a damaged cord or after the appliance has 

been damaged in any manner. If damage is 

suspected, return the appliance to the nearest 

Sunbeam Appointed Service Centre for 

examination, repair or adjustment. 

•  For additional protection, Sunbeam 

recommend the use of a residual current 

device (RCD) with a tripping current not 

exceeding 30mA in the electrical circuit 

supplying power to your appliances.

•  Do not immerse the appliance in water  

or any other liquid unless recommended.

•  Appliances are not intended to be operated  

by means of an external timer or separate 

remote control system.

•  This appliance is intended to be used in 

household and similar applications such 

as: staff kitchen areas in shops, offices and 

other working environments; farm houses; by 

clients in hotels, motels and other residential 

type environments; bed and breakfast type 

environments.

  SAFETY PRECAUTIONS FOR YOUR IRON
•  Do not leave a hot iron within reach of 

children. If they come into contact with a 

hot iron it could lead to serious burns.

•  Iron only on an ironing board.
•  An iron takes approximately 30 minutes to 

cool down. Allow the iron to cool completely 

before storing.

•  Do not wind the cord around the soleplate 

while the iron is still hot.

•  Do not leave the iron unattended while it is 

plugged into the power outlet.

•  Always unplug the iron from the power 

outlet before filling or emptying the water 

tank.

•  The iron must be used and rested on a 

stable surface.

•  The iron is not to be used if it has been 

dropped, if there are visible signs of  

damage or if it is leaking.

•  This iron features an “auto-off” function, 

which is an additional safety feature 

designed to disconnect power to the heating 

element if the iron has not been used for a 

certain period of time.

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

Summary of Contents for Solus Digital Resilium SR7000













Reviews: