Sunbeam Slow Juicer JE9000, Instruction Booklet

Page: 14 / 24

Troubleshooting Guide
12
Problem Possible Cause What to do
Juicer will not start when
switched ‘On’. The juicer hasn’t been
assembled correctly. See ‘Assembling your Slow
Juicer’ on page 7.
The motor appears to
struggle/cut out during use. Too much food being juiced
at once. Feed food into the chute
slower and use smaller size
pieces.
Food is clogging the juicing
screw. Turn the slow juicer to the off
position and wait until juicer
stops. Select the ‘Reverse’
position on the control switch
until blockage is cleared.
The pulp appears to be very
wet. Large amounts of fibrous
fruit and vegetables have
caused excess pulp to build
up in the filtering basket. Stop juicing, disassemble
the slow juicer and clean
the filtering basket using
the cleaning brush provided.
See ‘Disassembling your
Slow Juicer’ and ‘Care and
Cleaning’ sections. When
resume juicing feed food
slowly into the feed chute.
Juice comes out from the top
of the juice bowl. Too much food being juiced
at once. Feed food into the chute
slower and use smaller size
pieces.
Less juice is coming out from
the juice spout. Large amounts of fibrous
fruit and vegetables have
caused excess pulp to build
up in the filtering basket. Stop juicing, disassemble
the slow juicer and clean
the filtering basket using
the cleaning brush provided.
See ‘Disassembling your
Slow Juicer’ and ‘Care and
Cleaning’ sections.
The slow juicer motor will not
start. The motor has been
overloaded. Unplug the slow juicer and
allow to cool for 30 minutes
before using again.