Preheating the Mattress Pad
Never get into a cold bed again during the Winter season. Preheat turns the
heat up to warm your Mattress Pad before you get in. With this feature
activated, each side starts preheating when it is turned on. This lets two people
preheat their sides at different times.
1
To turn on preheat, after the Mattress Pad is on, press the “Preheat” button.
All zones will show a “P” while they are preheating.
NOTE:
Preheat will not work on zones selected to have heat turned off “–”. See adjusting
Zones individually on page 14.
The zones will heat for
30 minutes at the
highest setting “H” and
then return to their
previously programmed
heat settings.
2
To cancel preheat after
activating it, simply
press the “Preheat”
button again. The
Mattress Pad’s regular
heat settings for each
zone will resume.
NOTE:
At least one zone
must be selected for the
preheat function to work.
OPERATING INSTRUCTIONS
Auto Off
Auto Off conserves energy by automatically turning off each side of the
Mattress Pad after 10 hours of use. This is the factory default setting, and the
display will read “Auto Off” when this feature is active.
1
To deactivate Auto Off, press the “Auto
Off/Stay On” button on the remote control.
The display will then read “Stay On”, and
the Mattress Pad will remain on until you
turn it off using the “On/Off” buttons.
2
To reactivate Auto Off, press the “Auto
Off/Stay On” button on the remote control.
NOTE:
After a power outage, the timer of the Auto
Off feature automatically resets to the full 10
hours, but the Auto Off/Stay On setting remains as
selected.
OPERATING INSTRUCTIONS
For questions or support, please visit:
www.sunbeam.com
16
15
For questions or support, please visit:
www.sunbeam.com
Auto Off Deactivated
Auto Off Activated
Summary of Contents for Rest & Relieve FPO
Page 14: ......
