background image

Description of Display Symbols

Troubleshooting

If any abnormality occurs during use, please check and correct the following:

Condition

Correction

Display is blank when power is on.

Check and correct the polarity of the 
installed batteries. Reinstall or replace 
batteries.

Measurement incomplete or 

Review and follow “Applying Your

abnormally low or high values 

Blood Pressure Cuff” and “Taking

displayed.

Your Blood Pressure Reading” sections.
Replace the batteries.

EE symbol displays.

Did you talk or move during the 
measurement? Review “Applying Your 
Blood Pressure Cuff” section.

Measurements are different from 

Remember, blood pressure readings

those typically measured by 

are influenced by physical and mental

physician or every measurement

conditions and/or even the time of day.

reading is different.

Daily measurements should be
interpreted by your physician.

Display:

Icons: 

Systolic Pressure

Diastolic Pressure

Pulse Rate

No. of Memory
Sequence

Appears when measurement value is
stored in memory or is recalled from
memory

Appears when batteries should be
replaced

Shows the pulse rate per minute

Occurs when a mistake was made
during measurement

Appears when manual cuff deflation is
needed.

Appears when manual cuff inflation is
needed.

– 12 –

Summary of Contents for Health at Home 61-268-001















Reviews: