background image

  Sunbeam is very safety conscious when  

designing and manufacturing consumer products, 
but it is essential that the product user also 
exercise care when using an electrical appliance. 
Listed below are precautions which are essential 
for the safe use of an electrical appliance:

•  Read carefully and save all the instructions 

provided with an appliance.

•  Always turn the power off at the power outlet 

before you insert or remove a plug. Remove  
by grasping the plug - do not pull on the cord.

•  Turn the power off and remove the plug  

when the appliance is not in use and  
before cleaning.

•  Do not use your appliance with an extension 

cord unless this cord has been checked  
and tested by a qualified technician or  
service person.

•  Always use your appliance from a power  

outlet of the voltage (A.C. only) marked  
on the appliance.

•  Close supervision is necessary when your 

appliance is being used by children or infirm 
persons.

•  Young children should be supervised to ensure 

that they do not play with the appliance.

•  Never leave an appliance unattended while  

in use.

•  Do not use an appliance for any purpose  

other than its intended use.

•  Do not place an appliance on or near a hot gas 

flame, electric element or on a heated oven. 
Do not place on top of any other appliance.

•  Do not let the power cord of an appliance hang 

over the edge of a table or bench top or touch 
any hot surface.

•  Do not operate any electrical appliance with 

a damaged cord or after the appliance has 
been damaged in any manner. If damage is 
suspected, return the appliance to the nearest 
Sunbeam Appointed Service Centre  

for examination, repair or adjustment. 

•  For additional protection, Sunbeam 

recommend the use of a residual current 
device (RCD) with a tripping current not 
exceeding 30mA in the electrical circuit 
supplying power to your appliances.

•  Do not immerse the appliance in water  

or any other liquid unless recommended.

•  Appliances are not intended to be operated  

by means of an external timer or separate 
remote control system.

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

  SAFETY PRECAUTIONS FOR YOUR  

HAIR CUTTING SET.

•   For household use only.
•   Never touch the power plug with wet hands 

when unplugging it or plugging it in.

•   Always keep the hair cutter out of reach of 

children.

•   If the appliance is used with an extension 

cord or electrical portable outlet device they 
should be positioned so they are not subject to 
splashing or moisture.

•  Do not use this appliance continuously for 

more than 20 minutes. Allow the appliance to 
cool for 5 minutes between each use if being 
used for extended periods.

•   Do not place the blades in water or any other 

liquid white the unit is plugged into the power 

outlet.

•   Do not use the hair cutter with a broken or 

damaged trim guide.

•   Do not attempt to sharpen the hair cutter 

blades.

Summary of Contents for HC2900













Reviews: