Trimming Beards and Moustaches
Select the comb guide for the desired
hair length. Start below the chin and
gently guide the cutter upward and toward
your ear. Using the comb and scissors,
comb the moustache downward and trim
carefully along the lip line.
Using the Taper Lever
The taper lever allows for fine adjustment
to finished hair length without the need
to change to a finer comb guide. Use of
the taper lever will prolong the life of your
blades as a different cutting edge is used
in each position. Should hair get caught
between the blades during use, it can be
easily removed by moving the taper lever
up and down while the cutter is turned on.
When used
without the comb guides,
positioning the taper lever in the top
position will give a very close cut. As the
lever is moved down, the hair is left longer.
In the lowest position, the length of the cut
is the same as the length achieved with the
#1 comb.
When used
with the comb guides,
the taper
lever provides a cut between two guides.
For example, when using the #1 comb,
pushing the taper lever up will give a close
cut, resulting in shorter hair. Positioning
the lever down will lengthen the cut,
resulting in slightly longer hair.
TO CUT A COMB GUIDE’S NUMBERED
LENGTH, SET THE TAPER LEVER TO THE
LOWEST POSITION.
Cutting Hair (continued)
Summary of Contents for HC2900
Page 10: ...Notes ...