Sunbeam Euro Plus HE4900, Instruction Booklet

Page: 8 / 12

6
Before using your Euro Plus heater ensure it
is securely mounted on a wall.
Wall mounting
For maximum efficiency this heater should
be positioned so that the heat generated
mixes with the maximum volume of air. It
can be installed in any room of the home,
including the bathroom, in accordance with
the instructions below.
1. Remove the wall mounting bracket from
the rear of the heater by squeezing the
clips (at A and B in figure 2 below) and
pulling towards you.
2. Select a suitable location to mount the
heater, ensuring that it is at least 10cm
below any curtains or window furnishings,
10cm from any furniture located to either
side, and 75cm from any furniture placed
in front of the heater, as shown in figure 3.
The heater must be mounted horizontally,
with the control panel at the top.
Note: any electrical appliances to be fitted in
a bathroom should be installed by a qualified
electrician in accordance with Australian/New
Zealand Standard Wiring Rules. Portable
heaters should not be used in a bathroom.
Heaters that can be permanently fixed must
be installed so that any controls cannot be
reached by a person using a bath or shower,
as shown in figure 4.
Wall mounting your heater
A = 10 cm
A
B = 10 cm
C = 75 cm
Figure 2
Figure 3
60cm 60cm
Figure 4
A
B