background image

2

If you have any concerns regarding the performance and use of your appliance, 
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line 

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

Sunbeam are very safety conscious when 
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug. Remove 
by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug 

when the appliance is not in use and 
before cleaning.

• Do not use your appliance with an extension

cord unless this cord has been checked 
and tested by a qualified technician or 
service person.

• Always use your appliance from a power 

outlet of the voltage (A.C. only) marked 
on the appliance.

• Close supervision is necessary when your

appliance is being used near children or 
infirm persons.

• Never leave an appliance unattended while 

in use.

• Young children should be supervised to ensure

that they do not play with the appliance.

• Do not use an appliance for any purpose 

other than its intended use.

• Do not place an appliance on or near a hot gas

flame, electric element or on a heated oven.
Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang

over the edge of a table or bench top or touch
any hot surface.

• For safety reasons and to avoid maintenance 

by unskilled persons, some appliances are
‘sealed’ using tamperproof screws. Such
appliances should always be returned to the
nearest Sunbeam Appointed Service Centre 
for adjustment or repair if required.

• Do not operate any electrical appliance with a

damaged cord or after the appliance has been
dropped or damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre 
for examination, repair or adjustment. 

• For additional protection, Sunbeam

recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.

• Do not immerse the appliance in water 

or any other liquid unless recommended.

If you have any concerns regarding the performance and use of your appliance, 
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

Ensure the above safety precautions are understood.

Summary of Contents for Euro Plus HE4900













Reviews: