Owner’s Manual,
Model BC1712G Portable Gas Grill
BC1712G owner’s manual
9
Observe Flame Height When lit:
Flame should be a Blue / Yellow
color Between1”– 2” High
2”
1”
0”
Assure that the regulator control knob is in
the “lock off” position when attaching the
propane cylinder to the regulator.
When lighting, turn control knob to the off
position, and push in to turn on. Please
refer to “lighting instructions,” above.
When turning gas off, push the regulator
control knob and turn to “OFF” position.
IMPORTANT: Unfold, lock and secure legs in place. Open lid
prior to lighting grill. Attempting to light the burner with the lid
closed may cause an explosion! Make sure there are no
obstructions of airflow to the gas unit. Spiders and insects can
nest within and clog the burner / venturi tube at the orifice. A
clogged burner tube can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner. Make sure
control knob is in the “lock off” position. Place a lighted match
up through the hole in the bottom of the unit. Turn the regulator
valve to its “high” setting. After lighting, please observe the
burner flame, make sure all burner ports are lighted - a blue /
yellow flame of 1-2 inches from the burner rod should appear
(refer to drawing). If burner does not light in 5 seconds, turn the
gas regulator to its “off” position and wait 5 minutes for gas to
clear before trying again. If burner flame goes out during
operation, immediately turn the gas “off” and open lid to let the
gas clear for about 5 minutes. Attempt to re-light. Before
cooking on this grill for the first time, operate the grill for about
15 minutes with the lid closed and the gas turned on “high.”
This will “heat clean” the internal parts and dissipate odor from
the painted finish. Clean your grill after each use, DO NOT use
abrasive or flammable cleaners, as it will damage the parts of
this product and may start a fire. Clean
in
warm soapy water.
Lighting Your Grill