7
Using the shot of steam
The shot of steam can be used whether
dry or steam ironing when the temperature
dial is set to any temperature above the
two dot (••) setting.
1. Ensure the tank is at least ¼ full of
water.
2. Select the desired temperature and
wait until the thermostat light goes
out.
3. Press the shot of steam button
several times with the iron on the
soleplate to prime the pump.
NOTE:
If the tank has run dry, it may be
necessary to re-prime the pump after
filling the iron with water.
Using the spray mist
The spray mist can be used whether dry
or steam ironing to pre-dampen hard to
iron fabrics.
1. Ensure the tank is at least ¼ full of
water.
2. Press the spray trigger during ironing
to release a fine mist from the spray
nozzle.
Using your Sunbeam Iron
(continued)
The safety auto-off mechanism
automatically turns the iron off if you
forget.
The iron will automatically shut off if left
on the heel rest (vertical) for 15 minutes,
or in the ironing position (horizontal) for
30 seconds, without being moved.
The safety auto-off light on the handle
will flash and a warning beep will sound
to let you know that you have left the iron
unattended.
Power to the iron's heating element will
be cut.
Once the iron is moved the power will
reconnect. Allow the iron to heat until the
thermostat light goes out, and continue
ironing as normal.
The safety auto-off feature
15 minutes
30 seconds