background image

H

AIR

D

RYER

F

EATURES

Plug-In Model 1629-020

Hardwire Model 1629-040

5

4

O

PERATING

I

NSTRUCTIONS

This dryer is equipped with an Appliance Leakage Current Interrupter (ALCI) for your
safety. This device is designed to make the appliance inoperable under some abnormal
conditions

(such as accidental immersion in grounded water)

.

After the appliance is plugged in, you must check your protective device as follows:

1. Press the “Reset” button on the ALCI device.
2. Press the “Test” button. The “Reset” button will pop out. This verifies that the

protective device is working properly.

3. Press the “Reset” button once more to reactivate the safety device and use

your appliance.

REPEAT THE ABOVE PROCEDURE BEFORE EACH USE TO CONFIRM

THAT THE PROTECTIVE DEVICE IS OPERATING. 

If your protective device does not operate as described above, please contact your
Authorized Sunbeam dealer.
For your protection, this unit contains a thermostat that prevents the dryer from overheating.
Should the air intake and/or air outlet become blocked or obstructed, the hair dryer will
automatically shut off. If this occurs, slide the switch to “OFF,” unplug and allow dryer
to cool. If dryer continues to turn off automatically, discontinue use and contact your
Authorized Sunbeam distributor.

T

O

U

SE

1. Remove handset from base unit and pull handset cord to desired length – max length

is 5.5 feet.

2. Hair dryer will turn-on automatically when the on/off button on the handle is pressed

and held.

3. When finished, return handset to base unit.
4. Press cord retract button to retract cord into base unit.

C

ONTROL

F

EATURES

:

a. Power settings: 

• Low – low air, low heat
• Medium – high air, medium heat
• High – high air, high heat 

b. COOL SHOT on all power settings – eliminates heat
c. Retractable cord button
d. Night light switch

C

AUTION

Use your Sunbeam hair dryer with care. Directing a high volume of heat continuously to
one area can overheat hair and scalp. When using a “HIGH” heat setting, hold the blower
opening a few inches away from the hair, drying one section at a time. Work layers of hair
in quick strokes. Keep the dryer in motion until drying and styling are complete..

Summary of Contents for 1629-020



















Reviews: