Sun Oracle SPARC T3-1, Installation Manual

Page: 68 / 76

60 SPARC T3-1 Server Installation Guide • March 2012
▼
Assign a Static IP Address to the
Service Processor
If the network your server is connected to does not support DHCP for IP addressing,
perform the following procedure to update the OS configuration to static IP
addressing and to assign a static IP address to the service processor.
1. Set the service processor to accept a Static IP Address.
2. Set the IP address for the service processor.
3. Set the IP address for the service processor gateway.
4. Set the netmask for the service processor.
This example uses
255.255.255.0
to set the netmask. Your network
environment subnet might require a different netmask. Use a netmask number
most appropriate to your environment.
5. Use the
show /SP/network
command to verify that the parameters were set
correctly.
-> set /SP/network pendingipdiscovery=static
Set 'pendingipdiscovery' to 'static'
-> set /SP/network pendingipaddress=
service-processor-IPaddr
Set 'pendingipaddress' to '
service-processor-IPaddr
'
-> set /SP/network pendingipgateway=
gateway-IPaddr
Set 'pendingipgateway' to '
gateway-IPaddr
'
-> set /SP/network pendingipnetmask=
255.255.255.0
Set 'pendingipnetmask' to '
255.255.255.0
'
-> show /SP/network
/SP/network
Targets:
interconnect
ipv6
test
Properties:
commitpending = (Cannot show property)