Sun Oracle Netra SPARC T3-1B, Service Manual

Page: 93 / 136

Servicing Memory 81
6. Type the
show faulty
command.
If the
show faulty
command reports a fault with a UUID go to Step 7 . If
show
faulty
does not report a fault with a UUID, you have completed the verification
process.
7. Switch to the system console and type the
fmadm repair
command with the
UUID.
Use the same UUID that was displayed from the output of the Oracle ILOM
show
faulty
command.
Related Information
■
“Remove a DIMM” on page 73
■
“Install a Replacement DIMM” on page 74
■
“DIMM Configuration Reference” on page 81
DIMM Configuration Reference
This topic provides configuration guidelines, and the relationships between the
DIMM physical locations and FRU names.
DIMM configuration guidelines:
■
There are 16 DIMM slots that support industry-standard DIMMs.
■
You can install quantities of 4, 8, or 16 DIMMs.
■
Supported DIMM capacities: 2 Gbyte, 4 Gbyte, and 8 Gbyte.
Refer to the SPARC T3-1B Server Module Product Notes for the latest information.
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB/CMP0/BOB0/CH1/D0
/SP/faultmgmt/0 | timestamp | Dec 14 22:43:59
/SP/faultmgmt/0/ | sunw-msg-id | SUN4V-8000-DX
faults/0 | |
/SP/faultmgmt/0/ | uuid | 3aa7c854-9667-e176-efe5-e487e520
faults/0 | | 7a8a
/SP/faultmgmt/0/ | timestamp | Dec 14 22:43:59
faults/0 | |
# fmadm repair 3aa7c854-9667-e176-efe5-e487e520