Sun Microsystems XVR-500, Installation Manual

Page: 30 / 50

18 Sun XVR-500 Graphics Accelerator Installation Guide • September 2002
System Configurations
TABLE 3-1
shows the maximum number of Sun XVR-500 graphics accelerators
supported in Sun systems.
Note – It is recommended that the Sun XVR-500 graphics accelerators be installed in
the system 66-Mhz PCI connector slots, if 66-Mhz PCI slots are available on your
system.
Note – The Sun Fire V880 server requires the Sun Fire V880 I/O board 501-5142-12
or higher. Factory-shipped 900 MHz Sun Fire V880 servers have this revision level of
I/O boards. For earlier Sun Fire V880 servers, you will need to upgrade with I/O
board 501-5142-12 or higher.
TABLE 3-1
Supported Number of Sun XVR-500 Graphics Accelerators
Sun System
Maximum Number of
Devices Supported
Sun Blade 150 system 2
Sun Blade 1000 system 4
Sun Blade 2000 system 4
Sun Fire V480 server 3
Sun Fire V880 server 4