Sun Microsystems XVR-500, Installation Manual

Page: 25 / 50

Chapter 2 Installing the Sun XVR-500 Graphics Accelerator Software 13
7. Shut down the system after the Sun XVR-500 graphics accelerator software is
installed:
See the
shutdown(1M)
and
boot(1M)
manual pages for more details. To view the
shutdown
and
boot
man pages, type:
8. Install the Sun XVR-500 graphics accelerator hardware (see Chapter 3).
9. Reboot the system at the
ok
prompt to complete the installation:
Removing the Software
1. Log in as superuser.
2. Insert the Sun XVR-500 graphics accelerator CD into the drive.
3. Mount the CD-ROM drive.
■
If the drive is already mounted, type the following, and go to Step 4:
■
If the CD-ROM is not already mounted, type:
# shutdown
# man shutdown
# man boot
ok boot -r
# cd /cdrom/cdrom0
# mount -F hsfs -O -o ro /dev/dsk/c0t6d0s0 /cdrom
# cd /cdrom