Sun Microsystems XVR-300 x8, User Manual

Page: 47 / 66

Chapter 4 Using Features 29
■
Use the
-offset
option to adjust the position of the specified video output by
the value specified.
-offset xval yval
This is implemented only in
-doublewide
and
-doublehigh
modes. For
-doublewide
,
xval
is used to position the rightmost video output. Negative is
left (overlaps with the left video output). For
-doublehigh
, the
yval
is used to
position the bottom video output. Negative is up (overlaps with top video
output). The default is [0, 0].
2. Set the desired screen resolution. Type:
3. Log out, then log back in.
▼
To Set Up Two Independent Video Outputs
This set up enables independent resolution for each video output.
Note – The use of two independent video outputs on a single board with Xinerama
is not supported. The X window system and Sun OpenGL for Solaris performance
might be noticeably degraded in this mode.
Set up two video outputs over one large frame buffer whenever possible for a dual
video output configuration. See
“To Set Up Two Video Outputs Over One Large
Frame Buffer” on page 28 .
host%
fbconfig -dev nfb0 - res 1280x1024x60