Sun Microsystems XVR-300 x8, User Manual

Page: 37 / 66

Chapter 2 Installing the Hardware and Software 19
Default Console Display
Note –
The DMS-59
–
2xDVI-I adapter splitter cable for the Sun XVR-300 x8
graphics accelerator has two DVI-I video ports, but only the monitor DVI-I number
“1” video port can be console.
▼
To Set the Sun XVR-300 x8 Graphics Accelerator
as the Default Monitor Console Display
1. At the
ok
prompt, type:
The following shows how to set the console device:
2. Select the graphics accelerator you want to be the default console display.
In this example, you would select
b
for the Sun XVR-300 x8 graphics accelerator.
ok show-displays
a) /pci@1f,700000/SUNW,XVR-300@0
b) /pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0
q) NO SELECTION
Enter Selection, q to quit:
Enter Selection, q to quit: b
/pci@1e,600000/pci@0/pci@8/SUNW,XVR-300@0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1e,600000/SUNW,XVR-300@5