Sun Microsystems X3-3L, Installation Manual

Page: 49 / 80

Installing Windows Server Operating System 39
■
For ISO image . Ensure that the ISO image is available and that the Oracle
ILOM Remote System Console application is aware of the ISO image location.
For additional information about how to set up the installation media, see
“Selecting the Boot Media Option” on page 6 .
2. Reset or power on the server.
For example:
■
From the local server , press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■
From the Oracle ILOM web interface , click Host Management > Power
Control and select Reset from the Select Action list box.
■
From the Oracle ILOM CLI , type:
reset /System
The BIOS screen appears.
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
3. In the BIOS screen, press F8 to specify a temporary boot device for the Windows
installation.
The Please Select Boot Device menu appears. The screen that appears will be
different depending on whether you have BIOS configured for Legacy mode or
UEFI mode.
■
For Legacy BIOS, a screen similar to the following appears: