2
Sun Ultra 10 EMI Retrofit Guide • May 2002
If any items are missing from your retrofit kit, please contact your Sun service
representative for replacement.
Tools
To perform the retrofit, you need the following tools:
■
No. 2 Phillips screwdriver
■
Antistatic wrist strap (supplied in retrofit kit)
Retrofit Overview
The retrofit involves five tasks:
1. “Preparing the System for Parts Installation” on page 2
2. “Installing the TPE EMI Clip” on page 3
3. “Installing the Disk Drive EMI Clips” on page 4
4. “Installing the New CD-ROM Drive Cable” on page 8
5. “Finishing the Parts Installation” on page 10
Preparing the System for Parts
Installation
Read and follow the instructions provided in Chapter 7, “Preparing for Component
Replacement”, of the Sun Ultra 10 Service Manual, 805-7764. The chapter describes
how to power off the system, remove the peripheral cables and system cover, and
attach an antistatic wrist strap.
The service manual is available online from the following sources:
■
Sun Ultra 10 Software Supplement CD-ROM that ships with the system
■
http://docs.sun.com
■
http://www.sun.com/products-n-solutions/hardware/docs
