4
Sun Ultra 10 EMI Retrofit Guide • May 2002
2. Press the clip into the rear edge of the case, just above the TPE connector.
You might need to compress the clip to fit it into the narrow gap. Once in place, the
clip might remain compressed, which is normal for an older chassis.
3. Make sure that the two tabs fit into the slot in the chassis.
Installing the Disk Drive EMI Clips
The disk drive EMI clips can be identified by their open frame design. See
.
FIGURE 3
Disk Drive EMI Clip
Note –
If your system only has one clip, install two more clips. If your system has
two clips, install the third clip.
