Sun Microsystems Ultra 10 EMI, Retrofit Manual, Page: 5 / 12

Sun Ultra 10 EMI Retrofit Guide 3
Installing the TPE EMI Clip
The twisted-pair Ethernet (TPE) EMI clip can be identified by its elongated shape
and two tabs. See
FIGURE 1
.
FIGURE 1
TPE EMI Clip
▼
To Install the TPE EMI Clip
For this procedure, refer to
FIGURE 2
.
1. Locate the TPE connector on the Ultra 10 motherboard.
The connector is located at the rear corner of the system case.
FIGURE 2
TPE Connector and Clip Installation
Tabs (2)
1 2
3