35
C H A P T E R
8
Sun Port Manager
Sun Port Manager (SPM) is a software tool which provides a means to monitor the
status of the Front End Processor/Operating System (FEP/OS), which is the on-
board software run by the SunSAI/P.
SPM also shows the status of the individual ports on a module by displaying a
simulated modem status register. Each of the eight supported EIA-232 signals is
displayed, along with input and output flow control status.
SPM is installed automatically when you install this device driver, and can be run
from any terminal on the system.
Using SPM
To run the Sun Port Manager, enter the following command from any terminal, or
the system console:
The
-l
logfile option specifies the file path for screen dumps. If this option is not
specified, the default log file path is
/tmp/spmlog
. The Sun Port Manager is fully
documented in context-sensitive help screens.
spm [-l
logfile
]
Summary of Contents for SunSAI/P
