Sun Microsystems SunSAI/P, User Manual

Page: 34 / 60

20 SunSAI/P User’s Guide • November 1998
At this point, the
saipconfig
utility will configure the SunSAI/P interfaces
automatically. When
saipconfig
has finished configuring the interfaces, you will
see this message:
Manual Configuration
Use the
saipconfig
utility to configure the SunSAI/P adapters on your system
manually. The utility will ask you a series of questions about how you want to
customize the adapters. After you have answered these questions, the utility will
reconfigure the driver software.
1. Log onto to your system console as superuser (root).
2. To start the
saipconfig
utility, type:
3. To configure the adapters manually, answer no (
n
) to this question:
The
saipconfig
utility will ask you questions about how you want to configure the
SunSAI/P interfaces.
4. Press the Return key to configure your driver software.
Configuration Completed.
# /etc/opt/SUNWconn/bin/saipconfig
The installation has detected 1 SunSAI/P serial adapter.
Would you like to automatically install the default configuration? n
This script installs the Sun PCI Serial Asynchronous Interface
driver :
This script also installs the information needed by Solaris to use
the additional ports available through this driver. Depending upon
your system, the driver may support up to 12 Host Adapters.
Press <CR> to proceed or "Q" to quit: