Sun Microsystems SunFastEthernet Adapte, User Manual

Page: 24 / 88

2-4 SunFastEthernet Adapter User Guide—November 1994
2
Note – To find out the OpenBoot PROM revision level on your system, type
.version
at the
<#0> ok
prompt.
a. If the system has OpenBoot PROM 2.6 or above, use
watch-net-all
.
This example shows output when a be channel is connected to a 10Mbps
network.
Note – Activity may also be displayed for the le0 interface if it is connected.
<#0> ok watch-net-all
/io-unit@f,e0200000/sbi@0,0/qec@1,20000/be@0,0
Qe register test -- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- 100 mbps Link Down, 10 mbps Link Up, passed.
Tx/Rx enable/disable test--succeeded
Frame counter test--succeeded
Address detection test--succeeded
Address hash test--succeeded
Looking for Ethernet packets.
‘.’ is a good packet. ‘X’ is a bad packet.
Type any key to stop.
...............................................................
...............................................................
.................................
<#0> ok