Sun Microsystems SunFastEthernet Adapte, User Manual

Page: 83 / 88

Console Messages (Solaris 1.x Only) E-5
E
error is usually symptomatic of trouble elsewhere in the operating system.
and
The driver cannot allocate sufficient address space for resources. These
messages occur when attempting to load the driver. You will be unable to load
the driver until sufficient address space becomes free. Unloading unused
drivers is one way to free up address space.
The driver has run out of transmit message descriptors needed to queue a
packet to the device and discarded the packet. This error usually indicates that
the upper protocol layers are generating packets faster than the driver can
transmit them on the Ethernet and is usually selfcorrecting.
The device has dropped an incoming packet because it had no buffer space for
it. This is most likely due to the driver being under a heavy networking load.
be<num>: map_regs for qec per-channel reg failed
be<num>: map_regs for bmac reg failed
be<num>: map_regs for bmac transceiver reg failed
be<num>: mb_nmapalloc for QMD and buffers failed
be<num>: out of tmds - packet dropped
be<num>: pkt missed/drop error