Sun Microsystems SunATM 3U, Installation And User Manual

Page: 30 / 142

8 SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
▼
To Check the Package Installation Using
pkginfo
● After installing the SunATM software, you can check the installation using the
pkginfo
command.
The following example shows that
pkginfo
found the three SunATM software
packages.
Refer to the
pkginfo
(1) man page for more information about the command.
▼
To Check the Package Installation Using
pkgchk
● Once the package is installed, you can use the
pkgchk
command to see if the
installation is complete.
You can specify multiple packages at the command line by separating the package
names with a space. If you do not specify a package identifier, the entire contents of
the machine are checked. Refer to the
pkgchk
(1M) man page for more information
about the command.
▼
To Remove the Software Packages Using
pkgrm
● To remove the SunATM software packages from your system, use the
pkgrm
command as superuser.
In this example, the
pkgrm
command will remove the three SunATM software
packages from the system.
Refer to the
pkgrm
(1M) man page for more information about the command.
# /usr/bin/pkginfo | grep SUNWatm
system SUNWatm SunATM Device Drivers
application SUNWatma SunATM Interim Api Support Software
application SUNWatmu SunATM Runtime Support Software
# /usr/sbin/pkgchk SUNWatm
# /usr/sbin/pkgrm SUNWatm SUNWatma SUNWatmu