Sun Microsystems Sun Netra CP3220, User Manual

Page: 42 / 135

2-8 Sun Netra CP3220 Blade Server User’s Guide • January 2010
2.2.2.3 Configuring the Advanced Rear Transition Module Hardware
If you are using a Sun Netra CP32x0 Advanced Rear Transition Module (ARTM),
refer to the appropriate documentation. See
Section , “Related Documentation” on
page -xvii .
You can also see Section A.3, “Connectors and Pinouts” on page A-4 for detailed
connector pin assignments for the Sun Netra CP3220 blade server.
2.2.3 Installing the Sun Netra CP3220 Blade Server in
an ATCA Shelf
If you are installing the Sun Netra CP3220 blade server with the Sun Netra CP32x0
ARTM, install the Sun Netra CP32x0 ARTM at the rear of the server and then install
the Sun Netra CP3220 blade server in the front of the server. Even though you will
be installing the Sun Netra CP32x0 ARTM first, look at the front of the server and
locate the slot number where you will be installing the Sun Netra CP3220 blade
server. Then go to the back of the server and install the Sun Netra CP32x0 ARTM in
that particular slot. If you do not install the Sun Netra CP3220 blade server and the
Sun Netra CP32x0 ARTM in corresponding slots, the system will recognize the Sun
Netra CP3220 blade server but not the Sun Netra CP32x0 ARTM.
Note – Slots 1 through 6 and 9 through 14 are available for Sun Netra CP3220 blade
servers. Slots 7 and 8 are reserved for the switch card.
2.2.3.1 Installing an Advanced Rear Transition Module
A compatible advanced rear transition module (ARTM) can be used with the Sun
Netra CP3220 blade server for rear I/O access. The ARTM enables access to the
network, a boot device, and a console terminal. You can use the Sun Netra CP32x0
ARTM or you can design your own compatible ARTM. For more information, see
Section 1.4.2, “Advanced Rear Transition Module” on page 1-8