Sun Microsystems Sun Fire V480, Administration Manual

Page: 231 / 270

Chapter 11 Monitoring the System 203
How to Use Solaris System Information
Commands
This section explains how to run Solaris system information commands on a Sun
Fire V480 server. To find out what these commands tell you, see “Solaris System
Information Commands” on page 99, or see the appropriate man pages.
Before You Begin
The operating system must be up and running.
What to Do
1. Decide what kind of system information you want to display.
For more information, see “Solaris System Information Commands” on page 99.
2. Type the appropriate command at a console prompt. See
TABLE 11-1
.
TABLE 11-1
Using Solaris Information Display Commands
Command What It Displays What to Type Notes
prtconf
System configuration
information
/usr/sbin/prtconf
—
prtdiag
Diagnostic and configuration
information
/usr/platform/sun4u/
sbin/prtdiag
Use the
-v
option for
additional detail.
prtfru
FRU hierarchy and SEEPROM
memory contents
/usr/sbin/prtfru
Use the
-l
option to display
hierarchy. Use the
-c
option
to display SEEPROM data.
psrinfo
Date and time each CPU came
online; processor clock speed
/usr/sbin/psrinfo
Use the
-v
option to obtain
clock speed and other data.
showrev
Hardware and software revision
information
/usr/bin/showrev
Use the
-p
option to show
software patches.