Sun Microsystems Sun Fire V480, Administration Manual

Page: 121 / 270

Chapter 6 Diagnostic Tools 93
The
obdiag>
prompt and the OpenBoot Diagnostics interactive menu (
FIGURE 6-4
)
appear. For a brief explanation of each OpenBoot Diagnostics test, see
TABLE 6-10
in
“Reference for OpenBoot Diagnostics Test Descriptions” on page 116.
FIGURE 6-4
OpenBoot Diagnostics Interactive Test Menu
Interactive OpenBoot Diagnostics Commands
You run individual OpenBoot Diagnostics tests from the
obdiag>
prompt by typing:
where n represents the number associated with a particular menu item.
There are several other commands available to you from the
obdiag>
prompt. For
descriptions of these commands, see
TABLE 6-11
in “Reference for OpenBoot
Diagnostics Test Descriptions” on page 116.
You can obtain a summary of this same information by typing
help
at the
obdiag>
prompt.
obdiag> test
n
o b d i a g
1 SUNW,qlc@2 3 ebus@1
6 i2c@1,30
9 network@2
12 rtc@1,300070
2 bbc@1,0
4 flashprom@0,0
7 ide@6
10 pmc@1,300700
13 serial@1,400000
5 i2c@1,2e
8 network@1
11 rsc-control@1,3062f8
14 usb@1,3
Commands: test test-all except help what setenv versions exit
diag-passes=1 diag-level=off test-args=subtests